Fence installation, repair, staining & automatic gates in Fort Worth and nearby cities

Dark-stained wood privacy fence curving around a green backyard under a blue sky

Backyard privacy, built tight

Privacy Fence Installation Fort Worth

Privacy Fence Installation Fort Worth — make the backyard yours again. We build board-on-board cedar, horizontal wood and low-maintenance privacy fences with tight seams where you need screening most, gates that close flush and posts planned for Fort Worth clay.

  • Board-on-board for gap-free seams
  • Wood or low-maintenance materials
  • Gates that close flush and latch

Written quote · No obligation

Get your privacy fences quote

Tell us a little about the project and how to reach you. We will follow up with next steps.

Sent securely through Formspree. Privacy details.

Overview

Real privacy comes from the details, not just the height.

A privacy fence has one job: block the view. Height matters, but the details decide whether you actually get privacy. Side-by-side boards open small gaps as the wood dries. Gates leave daylight at the edges. A fence that steps down a slope can leave an opening at the bottom. We plan for all three.

For most Fort Worth backyards that means board-on-board construction, where overlapping boards cover every seam, or a horizontal design with tight joints. If you would rather never stain again, a low-maintenance privacy system gives the same solid screen. Then we set the height your HOA and the city allow and plan gates and slope transitions so the screening is continuous.

Privacy fences catch more wind than open fences, so posts, footings and rails matter even more. Long, exposed runs and taller fences get the structure they need to stay straight through spring storms.

Part of our wood fence installation service for Fort Worth homes and businesses.

Board-on-board cedar fence seen from the rail side, with steel posts
Overlapping boards cover the seams that shrinkage opens up.

Options

Three ways to build a privacy fence.

Close-up of new cedar fence boards and top cap in afternoon sun

Board-on-board cedar

Overlapping boards on alternating sides for privacy at every seam and a finished look from both sides. A popular privacy upgrade for Fort Worth backyards.

Cedar fence installation
Horizontal cedar privacy fence with stained boards along a tree-lined yard

Horizontal privacy

Long, tight-fitting horizontal boards for a modern screen that suits updated homes, patios and pool yards.

Horizontal fence installation

Plan it right

Privacy fence decisions to make up front

  • Height: what your HOA and the city allow, and where you need it taller

  • Style: board-on-board, horizontal or a low-maintenance system

  • Finished side: which side faces the neighbors or the street

  • Gates: width, swing, latch and a tight fit at the edges

  • Ground gap: how the fence handles slopes, pets and drainage

  • Finish: stain now, stain later, or a material that never needs it

Local know-how

Privacy in Fort Worth neighborhoods.

Two-story neighbors, alley-loaded lots and backyard pools make privacy one of the most common fence requests across Fort Worth.

Many HOAs cap fence height and specify the finished side and stain color, so we check your guidelines before the layout is final.

How it works

From first call to final walkthrough.

  1. Tell us about the project

    Call, email or send the quote form with your address, what you want built or fixed and a few photos. Rough measurements are plenty to start.

  2. Walk the property

    We look at the fence line, soil, slopes, gates and access, then talk through the options that fit and what each one changes.

  3. Get a written quote

    Your proposal lists the materials, layout, height, gates, tear-out, cleanup and terms, so it is easy to compare and nothing is left to guesswork.

  4. Build and walk through

    Utility lines are located before digging, the work gets done, and we walk the finished job with you: alignment, gate operation and cleanup.

Fence FAQs

Privacy Fences: your questions, answered.

What Fort Worth property owners ask about privacy fences.

More fence questions
What is the best privacy fence for a Fort Worth backyard?

For most yards, a board-on-board cedar fence offers the best balance of privacy, looks and price. Horizontal wood suits modern homes, and a low-maintenance privacy system is worth it if you never want to stain. Your HOA rules, budget and appetite for upkeep decide the rest.

How tall can a privacy fence be in Fort Worth?

It depends on the property, the fence location and any HOA rules. Many backyard privacy fences are 6 or 8 feet tall. Check current City of Fort Worth guidance and your HOA guidelines before choosing a height.

Does a board-on-board fence really have no gaps?

Board-on-board overlaps each seam, so shrinking boards do not open see-through gaps the way a side-by-side fence can. Gates and the bottom edge still need careful planning for continuous privacy.

How much does a privacy fence cost in Fort Worth?

Privacy fences are priced per linear foot. Material, height, board-on-board versus side-by-side, gates, tear-out and slopes set the total. A written quote lists each item so you can compare.

Can you replace my old privacy fence?

Yes. The old fence is torn out and hauled off, the line is checked and the new fence is built in your chosen style and height. Our fence replacement page explains what is involved.

Ready for a fence you will love coming home to?

Tell us what you want to build, fix or refresh. You will get a clear, written quote and straight advice on the options.